CONTACT US HOMEPAGE: www.nasa.gov/flightopportunities →

T0040-P

Microgravity Effects of Nanoscale Mixing on Diffusion Limited Processes Using Electrochemical Electrodes

PI: Carlos Cabrera, University of Puerto Rico - Rio Pedras

The overall concept is to create an Alternate Water Processor system that can recover water from exploration mission’s wastewater (includes surfactants found in hygiene and laundry wastes) and reduce consumable mass and power consumption compared to actual ISS systems. The system will be comprised by three components: (1) An advanced Membrane Aerated Biological Reactor (MABR) as the primary water processor which feeds to a (2) Forward Osmosis Secondary Treatment (FOST) System which then feeds ammonia solution to the key focus of this proposal, (3) the Electrochemical Ammonia Removal (EAR) system.


This project is directed to achieve a risk mitigation microgravity environment evaluation and electrode design activity for the EAR. This initiative is made in conjunction with NASA Ames Research Center and it supports the Office of the Chief Technologist (OCT) Next Generation Life Support (NGLS) project.

Paper (July 2012): Microgravity effects on the electrochemical oxidation of ammonia: A parabolic flight experiment.

Technology Areas (?)
  • TA10 Nanotechnology
Problem Statement

This project is for a study of the microgravity effects on nanoscale mixing of a diffusion limited process using electrochemical electrodes. In previous research by Micro-G CANM 1, the electrochemical oxidation of ammonia in microgravity conditions was utilized as the means to characterize a variety of nanomaterials according to their catalytic activity. The results of these parabolic aircraft experiments led to the measurement of a 20-65% decrease in the catalytic current under microgravity. This reduction in catalytic current is hypothesized to occur due to the lack of buoyancy driven mixing at the solution-electrode interface. It is believed that this effect is influenced by the pore size and structure of the material. This lack of buoyancy driven mixing at the solution-electrode interface may be addressed by inducing hydrodynamic turbulent mixing and by the reengineering of the electrode geometry and pore structure.

Technology Maturation

The objective of this project is to test these mitigation approaches and develop a better understanding of this phenomenon. The proposed research meets the requirements for the classification of a TRL 5 (Component and or breadboard validation in a relevant environment).

Future Customers

This project is critical to the Forward Osmosis Secondary Treatment (FOST) system being developed by NASA Ames Research Center and failure to complete this microgravity evaluation will result in a failure to meet key Next Generation Life Support program’s milestones. The design of the electrodes in the EAR is critical to its correct sizing and thus the FOST system.

Flight Experiment Objectives

This project will evaluate the effect on electrode performance by: employing hydrodynamic turbulence at different flow rates towards a platinum catalyst electrodeposited on a glassy carbon electrode, changing the electrode structure by utilizing bulk electrolysis, and changing the pore size by the utilization of three different mesoporous carbon supports (average diameters of: 64, 100 and 137 Å).

Payload Description

The Electrochemical Microgravity Laboratory (EML) is comprised of two major components: (1) Electronics Rack (ELR) to control the electrochemical operation and (2) Experimental Equipment Box (EEB) double contained Makrolon™ box safely containing the electrochemical cells (triple containment in overall).

Technology Details

  • Selection Date
    AFO3 (Mar 2012)
  • Program Status
    Completed
  • Current TRL (?)
    TRL 5
    Successful FOP Flights
  • 2 Parabolic

Development Team

Web Accessibility and Privacy Notices Curator: Alexander van Dijk Responsible NASA Official: Stephan Ord Last Update: November 16, 2018